![]() Simply plug this serial adapter into the serial port receiver on the USB to Serial Adapter cable, or the serial port on your computer if you have one and plug your key into the RCA plug. If you don't want to mess around trying to work out which wires connect to which, the best option is to get hold of another adapter like the one shown below: Set up the keying program to use the correct port.Ĭonnect the cable to the terminals on the key (work out which are the correct wires to connect by trial and error - key the key until you hear dits or dahs). Cut off the mouse and strip back the cable to bare the wiring. You can use an old 9 pin serial mouse to connect the key. ![]() Then, plug the USB connector into the USB port on your laptop/computer and connect your key to the 9 pin serial connector. The one I use and is compatible with Hamsphere is EHOCW available for free download at Firstly download and install the program. To get CW into Hamsphere using an external key, you need a keying program. They are available from Belkin and are also available elsewhere on the internet. If you have a laptop or Desktop PC and it does not have a serial port, you need to use a USB to Serial Port adapter cable.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |